writer:點膠機廠家 Click:141

When it comes to desktop hot-melt dispenser, we have to say that the 30cc hot-melt dispenser valve is used. Why is it called 30cc hot-melt dispenser valve? It mainly depends on the storage capacity. It can store 30ml hot-melt glue water. For manufacturer-.

writer:點膠機廠家 Click:189

Medical equipment production also often uses automatic dispensing machine, for example: medical wrist, it is necessary to apply glue to hot-melt dispensing machine. Material: plastic + sticky strip, stick the sticky strip on the plastic to avoid shedding..

writer:點膠機廠家 Click:118

3D printing is a very popular word at present. Many technologies use 3D printing method, which has achieved very effective results. Now some houses use 3D printing technology, which can withstand 12 m typhoon and 7 m earthquake. In addition to the high pr.

writer:點膠機廠家 Click:248

On the Internet, the author often finds that users ask what kind of glue is better for PP plastic bonding. As a dispensing automation manufacturer, they can provide some simple information, which can help you to understand and choose the suitable type of .

writer:點膠機廠家 Click:156

This time, we will explain how to deal with the leakage of metal glue according to the correct way. The glue needs to be treated according to the standard and correct treatment method to avoid more accidents. After learning the appropriate operation mode,.

writer:點膠機廠家 Click:155

The related application of polypropylene materials has been involved in a variety of electronic appliances, plastic hardware and other manufactured products. To select PP glue, we need to know two types: fast drying type and slow drying type. The fast dry.

writer:點膠機廠家 Click:169

Sponge is a kind of elastic material with strong water absorption. The existence of this property may affect the adhesion of sponge to metal. After bonding, ordinary glue may be absorbed by sponge and partially corroded. Therefore, the selection of glue s.

writer:點膠機廠家 Click:113

Instant glue is a kind of curing adhesive that can be used for sealing strip butt joint. When it reaches the curing effect, it is resistant to pulling and is not easy to loosen and fall off. After curing, the adhesive point has the advantages of no yellow.

writer:點膠機廠家 Click:213

As the automatic manufacturer of dispensing machine, Zhongzhi will provide an adhesive selection method for users to choose, because the operation quality of the selected equipment largely depends on whether the selected adhesive has good quality and good.

writer:點膠機廠家 Click:242

This time, we will introduce the technical knowledge about the repair of conveyor belt. The most common type of conveyor belt is made of rubber. In case of long-time transportation, there will be some problems such as wear, scratch or crack. Therefore, th.

writer:點膠機廠家 Click:166

This time, we will introduce the link and operation mode of PC lampshade bonding. PC is polycarbonate. Based on this, the lampshade made of this material has good impact resistance, good heat resistance and low temperature resistance. Therefore, it meets .

writer:點膠機廠家 Click:247

This time, we give a brief introduction to the small earphone dispensing. This link needs to be combined with the automation equipment and put into mass production. At present, we consider using a high-speed dispensing machine to complete the production t.

writer:點膠機廠家 Click:218

Rubber bonding stage can be combined with high-speed dispenser to complete fast and stable precision bonding, so how to ensure that rubber products have better bonding effect and strength? The performance of the dispensing machine is a key link, of course.

writer:點膠機廠家 Click:215

I think you are familiar with bolt as a fixed component. It is a kind of detachable fixed connection mechanical part, which can only be fixed when it is matched with nut in many times. Bolt gluing is a step to play two roles. After this technical adjustme.

writer:點膠機廠家 Click:164

LED driving power supply has high reliability and efficiency, and the development of the whole industry seems to be moving at a relatively fast pace. This paper makes a brief introduction to the glue filling process of driving power supply. In order to ma.

writer:點膠機廠家 Click:247

Some outdoor or park LED display screens that can be waterproof and moisture resistant are available for citizens to visit and understand. Why these products can work normally in rainy days without being affected is mainly due to the technology of screen .

writer:點膠機廠家 Click:157

A helmet with good quality and can be recycled for a long time will have a relatively high demand. Driven by the one helmet area policy, the current helmet manufacturing and production stage is affected. Helmet painting is mainly to apply an appropriate a.

writer:點膠機廠家 Click:119

The quality of mobile phone board has a profound impact on the value of most smart phones, so many mobile phone manufacturers begin to pay more attention to the construction and mode selection of this module. The dispensing stage of mobile phone board is .